This item
ISO NOISE Standard 0.60 × 1.20 × 50
- Thickness (mm)
- 50
- Width (mm)
- 600
- Length (mm)
- 1200
ISO NOISE Standard sound-insulation batt
Glass-wool batt for drywall, double-masonry and ceiling cavities, used to improve the sound insulation of the complete wall or ceiling.
- Thickness
- 50 mm
Product details
Glass wool in a clear PE bag · for drywall and ceiling cavities
- Thickness
- 50 mm
What is it?
ISO NOISE Standard is a 0.60 × 1.20 m, 50 mm glass-wool batt in a clear PE bag. It fills the stud cavity of a drywall partition or the gap in a double masonry wall, which is then closed with solid boards or masonry such as gypsum, fibre cement or brick. The batt damps sound inside the cavity; the sound insulation achieved depends on the whole wall system, not on the batt alone.
What is it made of?
Glass wool (fibreglass) · Facing: Fully enclosed in a clear PE bag (installed in the bag) · Board
What can it help with?
Which sizes are available?
Thickness 50 mm — Request a price
Limitations to know
It only helps when enclosed in a wall or ceiling cavity closed with solid boards on both sides. Gluing batts onto an existing wall does not block sound, and sound-insulation ratings (STC/Rw) belong to a tested wall system, not to the batt.
Where does the data come from?
ISO NOISE Standard catalogue
Technical data from the manufacturer's documents ISO NOISE · Checked 27 Sept 2026
Technical specifications
All values come from the manufacturer's documents, with conditions and test standards. Values the documents do not state are not shown.
| Property | Value | Conditions / standard | Source |
|---|---|---|---|
| Material | Glass fibre in a clear PE bag | — | ISO NOISE Standard catalogue, p. 1 |
Models and sizes available
| Model | Thickness (mm) | Width (mm) | Length (mm) |
|---|---|---|---|
| 0.60 × 1.20 × 50 | 50 | 600 | 1200 |
Pack quantities and prices — ask us on LINE
Applications
WallsStop sound through walls, reduce echo, keep heat outCeilingsHeat insulation above the ceiling and less sound through itHomesHeat, neighbour noise and echo at home
Highlights
- 0.60 × 1.20 m, 50 mm thick
- Clear PE bag — install in the bag
- For stud walls and double masonry walls
Installation overview
- Fill the stud or cavity space completely with batts in their PE bags — no adhesive needed
- Cut batts to fit part-width bays; leave no gaps
- Close with solid boards or masonry (gypsum, fibre cement, brick) and seal the perimeter joints
Always follow the manufacturer's installation and safety instructions.
Related products
Alternatives
Sound insulation · Glass wool
SCG Cylence ZoundBlock
- Thickness
- 50–100 mm
- Density
- 32 kg/m³
- Thermal conductivity (λ)
- ≤ 0.033 W/m·K
Sound insulation · Stone wool
ROCKWOOL Safe 'n' Silent Pro
- Thickness
- 25–100 mm
- Density
- 40–100 kg/m³
- Sound absorption (NRC)
- 0.90–1.00
Helpful before you choose
Not sure which model suits your job?
Send the area details or site photos — we'll suggest the model and quantity
Ask via LINE